The home screen

This is the user interface home screen of the StarLeaf Touch 2036:

To display the home screen of the touchscreen controller from any other of its other screens, press the Home button. To access the settings, double-press the Home button.

If you are an existing customer using a touchscreen controller with an older user interface and would like to have the new UI as shown above, please contact StarLeaf Support.

Camera control for the PTZ camera

The camera control tab on the home screen provides you with controls for the PTZ camera.

The near-end camera control (my camera) allows you to pan, tilt, and zoom your camera. This control is available both in a call and before you make a call. If the far end is using a PTZ camera, you might be able to control it yourself using the far-end camera control (their camera). If control of their camera is not possible, the button text will say this, as shown in the example above.

Camera presets are pre-defined camera positions. For example, a pre-defined position that points the camera at the whiteboard, or that changes the camera to a wide-angled view. Select the position you require from the touchscreen controller.

Connected device indicators

	A computer is connected to the room system
	The computer that is connected to the room system is asleep
	There is one screen connected to the room system
	There are two screens connected to the room system
	There are no screens connected to the room system
	A flashing exclamation mark indicates one of the following circumstances: There is a local or remote IP network problem The Cloud is temporarily unavailable due to an upgrade. During a Cloud upgrade, all endpoints display the exclamation mark for a short while (before rebooting, possibly upgrading their firmware and then reconnecting). StarLeaf provides advance notice of the exact time and date of any Cloud upgrade