Introducing the GTm Family
Using GTm FamilyLast updated May 9, 2017
The StarLeaf GTm family consists of the GTm 5250 and the GTm 5140 Huddle. These meeting room endpoints connect to Skype for Business and Lync servers as an easy-to-use video meeting room system. You will have either a one or two screen system.
Introducing the touchscreen controller
Every GTm system comes with a touchscreen controller: the StarLeaf Touch 2035. You use the touchscreen controller as the means for making and controlling video calls with GTm. Through the touchscreen controller, you can access the directory and contacts, and join conferences.
The figure below shows the features on the front of the StarLeaf Touch 2035.
|Audio mute||Toggle the microphone on and off. The button lights when the microphone is off. When you are in a call and your audio mute is on, nobody in the call can hear what you are saying|
Toggle the camera on and off. The button lights when the camera is off. When you are in a video call and the video mute is on, nobody in the call can see you
|Home||Press to display the home screen of the touchscreen controller from any screen in the interface. Double-press to access the touchscreen controller’s settings|
|Audio volume down||Press during a call to decrease audio volume or, if you are not in a call, press to decrease the loudness of the ringer|
|Audio volume up||Press during a call to increase audio volume or, if you are not in a call, press to increase the loudness of the ringer|
|Press to answer an incoming call. At other times, press to access the dial screen and the directory|
|Hang up||Press to end the current call|
Out-of-hours power saving for touchscreen controllers
The backlight on a touchscreen controller dims between the hours of 7pm and 7am in the endpoint’s local timezone. When a touchscreen controller is dimmed, it shows a screen saver displaying the time. Touching the dimmed screen causes the backlight to light again. A touchscreen does not dim for one hour after the last time it was touched.
Power saving is automatically enabled for all touchscreen controllers. There is no configuration.