Screenshots from a StarLeaf room system
Managing StarLeaf advanced
Last updated October 18, 2019You can take screenshots of your room system’s touchscreen controller. Before starting, make a note of your room system’s IP address:
- Touch 2035/36: double press the Home button and navigate to Networking
- Touch 2045: double tap the Home icon and go to Network
Screenshots are generated online in any web browser. You can only generate one screenshot at a time.
Using a Touch 2035/36
To take screenshots of your Touch 2035/36 display:
- Navigate to the screen that you want to capture.
- Hold down the Home key whilst simultaneously dialing 243373.
- Allow a few seconds for the screenshot to generate.
- View your screenshot in a web browser by going to http://hostname:23456/screenshot.bmp (where “hostname” is the room system’s IP address).
Using a Touch 2045
To take screenshots of your Touch 2045 display:
- Connect a keyboard to your touchscreen controller using a USB-A to USB-C adapter.
- Restart your touchscreen controller by removing the power cable (same as the ethernet cable).
- Reconnect the power cable. It may take a few minutes for your touchscreen controller to restart.
- Press the Esc (escape) key on your keyboard to take a screenshot of the touchscreen’s current display.
- Allow a few seconds for the screenshot to generate.
- View your screenshot in a web browser by going to http://hostname:23456/screenshot.png (where “hostname” is the room system’s IP address).