You can take screenshots of your room system’s touchscreen controller. Before starting, make a note of your room system’s IP address:

  • Touch 2035/36: double press the Home button and navigate to Networking
  • Touch 2045: double tap the Home icon and go to Network

Screenshots are generated online in any web browser. You can only generate one screenshot at a time.

Using a Touch 2035/36

To take screenshots of your Touch 2035/36 display:

  1. Navigate to the screen that you want to capture.
  2. Hold down the Home key whilst simultaneously dialing 243373.
  3. Allow a few seconds for the screenshot to generate.
  4. View your screenshot in a web browser by going to http://hostname:23456/screenshot.bmp (where “hostname” is the room system’s IP address).

Using a Touch 2045

To take screenshots of your Touch 2045 display:

  1. Connect a keyboard to your touchscreen controller using a USB-A to USB-C adapter.
  2. Restart your touchscreen controller by removing the power cable (same as the ethernet cable).
  3. Reconnect the power cable. It may take a few minutes for your touchscreen controller to restart.
  4. Press the Esc (escape) key on your keyboard to take a screenshot of the touchscreen’s current display.
  5. Allow a few seconds for the screenshot to generate.
  6. View your screenshot in a web browser by going to http://hostname:23456/screenshot.png (where “hostname” is the room system’s IP address).