StarLeaf Room for Windows Beta
Installing StarLeaf Room for WindowsLast updated July 30, 2020
Thank you for participating in the StarLeaf Room for Windows beta program. If you would like to join the beta program, apply here .
On this page:
- Recommended requirements
- Known limitation
- Installing StarLeaf Room for Windows
- StarLeaf Portal admin account
- Android device that is set up with an appropriate Google account
- Windows PC
- The Android device and Windows PC must be on the same network. This requirement will be removed soon.
- TV screen*
- HDMI cable to connect your PC and TV screen*
If you do not have this, you can request a trial Portal admin account here.
This will be used as the StarLeaf Room Control. See recommended requirements below.
*These are optional but recommended to improve video and audio quality. The integrated camera and mic in the PC may not provide an optimal video meeting experience.
|Device type||Windows PC|
|Operating system||Windows 10|
|Processor||Intel Core i5/i7 2015 or later|
|Memory||4GB Ram or above|
|Graphics card||DirectX10 compatible|
|Operating system||Android 9.0 or later|
|Screen size||7 to 10 inches (17.78 to 25.4 cm)|
Download and upload speeds of 1.5 Mbps for High Definition video conferencing. Content sharing and/or video functionality might be restricted at speeds below 384 kbps.
Content sharing is not yet possible through StarLeaf Room but is coming soon. Until then, you could:
- join a meeting from a StarLeaf app on desktop or mobile to share content, or
- use Logitech Screenshare
Follow all of the instruction sections below to complete your setup of StarLeaf Room for Windows and StarLeaf Room Control.
- Section 1: Download StarLeaf Room for Windows
- Section 2: Add StarLeaf Room for Windows in your Portal
- Section 3: Provision StarLeaf Room for Windows
- Section 4: Set up StarLeaf Room Control
- Section 5: Configure AV settings
- Download the StarLeaf Room for Windows file to your PC from here.
- Click on the downloaded file in your browser to open it. StarLeaf Room installs.
- Select Finish.
- Select Get started.
- Select Sign in.
- Proceed to the next part, Section 2: Add StarLeaf Room for Windows in your Portal
You are redirected to your Portal Admin account to sign in. If you do not yet have an admin account, you can request a trial admin account here.
StarLeaf Room for Windows on your PC now displays the QuickConnect code screen as shown below.
- Go to StarLeaf Portal
- Go to Room systems and select Add room system
- Complete the details for your room system such as the name, language, and site.
- In Hardware endpoint > Codec select StarLeaf Room for Windows
- Select Add Controller and choose StarLeaf Room Control
- Select Apply at the bottom of the page to generate two QuickConnect codes, one for the codec and one for the controller. Take note of these codes.
- Enter the QuickConnect code for StarLeaf Room for Windows (generated in the StarLeaf Portal) on your Windows PC.
- Your Windows PC displays the screen below.
- Now move to your Android controller to begin the StarLeaf Room Control setup.
- Download the StarLeaf Room Control app on your Android device. From your Android device, you can do this in three ways:
- Click here
- or go to the Google Play Store and search for StarLeaf Room Control
- or scan the QR code provided on your Windows PC as shown below.
- In the Google Play Store, select Install > Continue
- If you are prompted to, enter your Google account password.
- Wait for the StarLeaf Room Control app to download onto your Android device.
- Open StarLeaf Room Control on your Android device.
- Press Get started.
- Select Continue.
- Select Continue again.
- Enter the QuickConnect code for StarLeaf Room Controller (generated in the StarLeaf Portal) on your room controller.
- Now move to your Windows PC to complete setup here.
When the QuickConnect code is accepted, StarLeaf Room Control displays this screen:
- On your Windows PC, select Next
- Configure your AV devices
- Select Next. Setup is complete.
- Select Start using StarLeaf Room
The idle home screen of your StarLeaf Room will look something like this:
The StarLeaf Room Control home screen looks something like this:
During installation, StarLeaf Room for Windows runs in the local PC and Android device’s language but when it is installed and has connected to the StarLeaf platform, StarLeaf Room will adopt the language settings that are configured for the organization or endpoint in the Portal (if they are different to the language settings on the PC or Android device).